.jpg){kind=logo}
Stenamma zelum
| Stenamma zelum | |
|---|---|
| |
| Scientific classification | |
| Kingdom: | Animalia |
| Phylum: | Arthropoda |
| Class: | Insecta |
| Order: | Hymenoptera |
| Family: | Formicidae |
| Subfamily: | Myrmicinae |
| Tribe: | Stenammini |
| Genus: | Stenamma |
| Species: | S. zelum |
| Binomial name | |
| Stenamma zelum Branstetter, 2013
| |
Stenamma zelum is known almost exclusively from Winkler and Berlese samples of sifted leaf litter. Only once has a stray individual (a dealate queen) been collected by general searching. This species is found from 350–1700 m elevation, but is most common at mid-elevations around 1000 m. It inhabits mature wet forest environments, such as montane rainforest and cloud forest.
Identification
Branstetter (2013) - Integument mostly dark red-brown to brown; medium to large-sized species (see HL, ML, PrW below); head and promesonotum mostly foveate to coarsely rugoreticulate; eye relatively small (EL 0.10–0.13, REL 12–16), somewhat bulging, subcircular to slightly oval-shaped, with 6–8 ommatidia at greatest diameter; gastral pilosity long, dense, and mostly suberect; propodeal spines reduced to sharp angles or small tubercles (PSL 0.12–0.16, PSI 1.0–1.3); anterior clypeal margin with a median excavation containing 2 sharp outer teeth and 2 smaller inner teeth (sharp to blunt); basal margin of mandible straight to slightly sinuous, without a basal notch or depression. Similar species: Stenamma brujita.
Stenamma zelum is a distinctive species that is unlikely to be confused with any other Stenamma. Stenamma brujita has many convergent traits (e.g. size and sculpture) but can be separated by locality; S. zelum, eastern Honduras to Panama and S. brujita, western Honduras to southern Mexico. S. zelum contains two morphotypes, the more common form, represented by the type series, and a high elevation form, which is known only from a few sites above 1500 m in Costa Rica (e.g. 9km NE Vara Blanca, Est. Pittier, Las Alturas Biological Station). The variant has reduced sculpturing, in which the foveae have become less distinct, and large smooth patches are present on the side of the head and pronotum. Also, the clypeal teeth are reduced, with the inner teeth blunt and nearly absent.
Keys including this Species
Distribution
Honduras to Panama.
Latitudinal Distribution Pattern
Latitudinal Range: 15.72245° to 8.783°.
| North Temperate |
North Subtropical |
Tropical | South Subtropical |
South Temperate |
- Source: AntMaps
Distribution based on Regional Taxon Lists
Neotropical Region: Costa Rica, Honduras, Nicaragua (type locality), Panama.
Distribution based on AntMaps
Distribution based on AntWeb specimens
Check data from AntWeb
Countries Occupied
| Number of countries occupied by this species based on AntWiki Regional Taxon Lists. In general, fewer countries occupied indicates a narrower range, while more countries indicates a more widespread species. |
|
Estimated Abundance
| Relative abundance based on number of AntMaps records per species (this species within the purple bar). Fewer records (to the left) indicates a less abundant/encountered species while more records (to the right) indicates more abundant/encountered species. |
|
Biology
Castes
Males have not been collected.
Worker
Images from AntWeb
      
| |
| Holotype Stenamma zelum. Worker. Specimen code casent0622535. Photographer Michael Branstetter, uploaded by Default Group. | Owned by USNM. |
    
| |
| Worker. Specimen code inbiocri001280618. Photographer Michael Branstetter, uploaded by Default Group. | Owned by JTLC. |
Queen
Images from AntWeb
   
| |
| Queen (alate/dealate). Specimen code casent0622537. Photographer Michael Branstetter, uploaded by Default Group. | Owned by MGBPC. |
    
| |
| Queen (alate/dealate). Specimen code casent0621980. Photographer Michael Branstetter, uploaded by Default Group. | Owned by MGBPC. |
Nomenclature
The following information is derived from Barry Bolton's Online Catalogue of the Ants of the World.
- zelum. Stenamma zelum Branstetter, 2013: 269, figs. 169-171 (w.q.) NICARAGUA, COSTA RICA, HONDURAS, PANAMA.
- Type-material: holotype worker, 15 paratype workers, 4 paratype queens.
- Type-locality: holotype Nicaragua: Jinotega, Parque Nac. Cerro Saslya, 13.77148°N, 85.01152°W±10 m., 1110 m., 12.v.2011, LLAMA Wa-D-03-1-35; paratypes: 2 workers with same data, 7 workers, 2 queens with same data but 13.77077°N, 85.00156°W±20m., 850 m., 8.v.2011, LLAMA Wm-D-02-2-02, 6 workers, 2 queens with same data but 13.77000°N, 85.00326°W±20m., 920 m., 8.v.2011, LLAMA Wm-D-02-2-03.
- Type-depositories: USNM (holotype); CASC, CFSS, EAPZ, FMNH, ICNB, INBC, JTLC, LACM, MCZC, MGBC, MZSP, UCDC, UNAM, USNM, UVGC (paratypes).
- Distribution: Costa Rica, Honduras, Nicaragua, Panama.
Unless otherwise noted the text for the remainder of this section is reported from the publication that includes the original description.
Description
Worker
(11 measured) HL 0.87–1.03 (0.99), HW 0.78–0.92 (0.85), FLD 0.26–0.31 (0.29), PCW 0.04–0.08 (0.07), SL 0.67–0.80 (0.74), EL 0.10–0.13 (0.11), ACL 0.58–0.69 (0.60), ML 1.15–1.38 (1.29), PrW 0.55–0.67 (0.63), PSL 0.12–0.16 (0.14), SDL 0.10–0.16 (0.13), PL 0.46–0.56 (0.53), PH 0.25–0.29 (0.29), PW 0.17–0.21 (0.20), PPL 0.27–0.32 (0.32), PPH 0.22–0.27 (0.25), PPW 0.21–0.26 (0.24), MFL 0.82–0.99 (0.93), MTL 0.65–0.80 (0.73), CI 86–92 (86), SI 83–89 (86), REL 12–16 (13), FLI 31–34 (34), PSI 1.0–1.3 (1.1), MFI 91–98 (92), ACI1 65–68 (65), ACI2 82–89 (82).
Medium to large-sized species; general body color mostly dark red-brown, with patches of brown and orange-brown on gaster, appendages lighter; setae golden brown; mandible with 6–9 teeth, consisting of 3 distinct apical teeth, a distinct basal tooth, and 2–5 inner teeth/denticles, which are usually worn and indistinct; basal margin of mandible straight to slightly sinuous, without a basal notch or depression; mandible mostly smooth and shiny, with scattered piligerous punctae and faint striae; anterior clypeal margin viewed from an anterodorsal angle with a median excavation containing 2 sharp outer teeth and 2 smaller inner teeth, which are sharp to blunt, and recessed behind median lobe of clypeus (not visible with mandibles closed); median lobe of clypeus usually with a pair of faint carinulae that diverge toward the anterior margin, apex of lobe with a short transverse carinula, remainder of clypeus mostly smooth and shiny, sometimes with a few additional rugulae on median lobe; posterior extension of clypeus between antennal insertions of moderate width (PCW 0.04–0.08), sides subparallel to slightly diverging posteriad; frontal lobes well-developed, but not completely covering torular lobes in full-face view (FLD 0.26–0.31, FLI 31–34); head appearing subrectangular (CI 86–92), with posterior margin depressed medially; eye relatively small (EL 0.10–0.13, REL 12–16), somewhat bulging, subcircular to slightly oval-shaped, with 6–8 ommatidia at greatest diameter; face usually strongly foveate to coarsely rugoreticulate, with a few longitudinal costae along midline, interstices with piligerous punctae, some high-elevation populations with face sculpture more polished and effaced, especially on side of head, which can be smooth and shiny; scape relatively short (SI 83–89), not reaching posterior margin of head when laid back; scape surface mostly smooth and shiny, with scattered piligerous punctae; flagellum with an indistinct 4-segmented antennal club; mesosoma usually densely sculptured, with promesonotum mostly foveate (especially on dorsum) and remaining surfaces foveate to rugoreticulate or rugose, in some high-elevation populations sculpture is reduced, with foveae on promesonotal dorsum appearing more like transverse furrows, and with side of promesonotum largely smooth and shiny; propodeal declivity mostly smooth and shiny, usually with a few transverse carinulae; promesonotum in profile low-domed, slightly asymmetrical, with the apex shifted anteriorly; anterior face of promesonotum longer and steeper than posterior face and mostly smooth; metanotal groove well-demarcated, of moderate width and depth; propodeal spines forming sharp angles or at most small tubercles (PSL 0.12–0.16, PSI 1.0–1.3); petiole relatively long (PL/HW 0.58–0.63), with node of average size (PH/PL 0.51–0.54); node in profile variable, usually forming a small roughly symmetrical dome with a rounded dorsum, but sometimes dome more asymmetrical with anterior face longer than posterior face, and sometimes with apex more sharp and positioned anterior of midpoint; postpetiole somewhat elongate (PPH/PPL 0.79–0.88) and globular, about the same height and volume as petiolar node (PPH/PH 0.88–0.98), postpetiolar node asymmetrical, with anterior face longer than posterior face; venter of postpetiole in profile usually distinctly sinuous, with anteroventral margin forming a small process; petiolar and postpetiolar nodes mostly smooth and shiny, remaining waist surfaces faintly punctate; gaster mostly smooth and shiny, with scattered piligerous punctae; most of body with a moderately dense layer of long suberect to subdecumbent pilosity; scape with layer of longer sparser suberect setae and layer of shorter subdecumbent setae; gastral setae not distinctly bilayered, forming a moderately dense layer of long suberect to subdecumbent setae; setae on legs suberect to decumbent, with longer suberect hairs on coxae and femoral venters.
Queen
(5 measured) HL 0.86–1.01 (0.92), HW 0.78–0.90 (0.84), FLD 0.27–0.32 (0.29), PCW 0.05–0.09 (0.06), SL 0.67–0.78 (0.71), EL 0.16–0.20 (0.17), ACL 0.59–0.67 (0.61), ML 1.25–1.48 (1.33), PrW 0.68–0.79 (0.71), PSL 0.15–0.19 (0.17), SDL 0.13–0.18 (0.14), PL 0.52–0.58 (0.54), PH 0.26–0.31 (0.28), PW 0.19–0.23 (0.21), PPL 0.31–0.33 (0.33), PPH P0.24–0.28 (0.25), PW 0.19–0.23 (0.21), MFL 0.83–0.98 (0.89), MTL 0.67–0.78 (0.69), CI 88–93 (92), SI 83–88 (84), REL 20–23 (20), FLI 33–35 (34), PSI 1.1–1.2 (1.1), MFI 92–94 (94), ACI1 65–67 (65), ACI2 83–89 (86).
Same as worker except for standard queen modifications and the following: mesoscutum foveate, except for a longitudinal strip of completely smooth cuticle, which crosses the entire surface; mesopleuron mostly smooth and shiny; propodeum carinate to rugose, with sculpture transversely wrapping around surface; wing venation as in photo.
Type Material
Holotype worker. NICARAGUA, Jinotega: Parque Nacional Cerro Saslaya, 13.77148°N, 85.01152°W ±10m, 1110m, 12 May 2011, ridgetop cloud forest, ex sifted leaf litter (LLAMA, collection Wa-D-03-1-35) USNM, specimen CASENT0622535. Paratypes: same data as holotype 1w, CASC, CASENT0622534, 1w, EAPZ, CASENT0622536; same data but 13.77077°N, 85.00156°W ±20m, 850m, 8 May 2011 (LLAMA, Wm-D-02-2-02) 1w, ECOSCE, CASENT0623510, 1w, FMNH, CASENT0623511, 1w, ICN, CASENT0623512, 1dq, 1w, INBio, CASENT0623508, CASENT0623513, 1w, JTLC, CASENT0623514, 1w, LACM, CASENT0623515, 1dq, 1w, MGBPC, CASENT0623509, CASENT0623516]; 13.77000°N, 85.00326°W ±20m, 920m, 8 May 2011 (LLAMA, Wm-D-02-2-03) 1dq, 1w, MCZ, CASENT0623517, CASENT0623519, 1w, MZSP, CASENT0623520, 1w, UCDC, CASENT0623521, 1w, UNAM, CASENT0623522], 1dq, 1w, USNM, CASENT0623518, CASENT0623523, 1w, UVGC, CASENT0623524.
References
- Branstetter, M. G. 2012. Origin and diversification of the cryptic ant genus Stenamma Westwood (Hymenoptera: Formicidae), inferred from multilocus molecular data, biogeography and natural history. Systematic Entomology 37:478-496. doi:10.1111/j.1365-3113.2012.00624.x
- Branstetter, M.G. 2013. Revision of the Middle American clade of the ant genus Stenamma Westwood (Hymenoptera, Formicidae, Myrmicinae). ZooKeys 295, 1–277. doi:10.3897/zookeys.295.4905
References based on Global Ant Biodiversity Informatics
- Branstetter M.G. 2013. Revision of the Middle American clade of the ant genus Stenamma Westwood (Hymenoptera, Formicidae, Myrmicinae). ZooKeys 295: 1277
- Longino J. T. L., and M. G. Branstetter. 2018. The truncated bell: an enigmatic but pervasive elevational diversity pattern in Middle American ants. Ecography 41: 1-12.
- Longino J. et al. ADMAC project. Accessed on March 24th 2017 at https://sites.google.com/site/admacsite/